Flat joint Hepa laminar filters

Laminarven 78 mm

Terminal or air return filtration in clean rooms and laminar flow cabins.

Technical features

Type: Laminar Flow HEPA Panel.
Frame: Extruded and anodised aluminum profile.
Filtering Element: Glass microfiber paper.
Separators: Thermoplastic glue beads.
Sealant: Polyurethane.
Protective grid: Steel grid on both sides; white epoxy painted.
Joint: Gasket with plane profile of neoprene.
OPTIMAL PRESSURE FOR FILTER FIXING: 70KPa
MPPS Efficiency: 85%, 99.95% and 99.995%
EN 1822 Class: E10, H13 and H14.
Recommended Final Pressure Loss: 600 Pa.
Temperature: 80ºC in continuous service.

Advantages

– Extruded anodized aluminum frame, to avoid detachment of particles from chipboard or similar materials.
– Protection grids on both sides.
– Gird protection at the air outlet and inlet to prevent filter surfaces breakages.
– The V-shaped pleating method guarantees the optimal fold geometry and a
uniform distance between them, resulting in a lower load loss with higher airflow rate.
– 100% scanned in accordance with regulation EN 1822-4.
– DOUBLE LABELLING.
– Suitable food industry.
– ATEX version available.


Detail of the flat seal neoprene

Category

Absolute Filtration / Clean RoomsClass: E, H

Certificates

Graphic

FUNCTION OF PRESSURE DROP VS. FLOW RATE
LV-78 H13

Laminarven 78 mm

References

*UxP: Units per box *Stock
F: Manufacture, S: Stock, SL: Limited Stock